Desire Hydraulics builds H frame hydraulic presses at MIDC Bhosari, Pune, and supplies them to industrial customers across India and the UAE. Each press is designed, machined and pressure-tested in-house and specified around the customer's component: tonnage, stroke, daylight, bed size, speed and controls. If you are comparing H frame press manufacturers in Pune, ask each one to justify the specification for your job, not just quote a tonnage.
Buyers usually open with "I need a 100 ton H frame press. What is the price?" It is a fair start, but it is the wrong question. Two 100-tonne presses can differ in stroke, daylight, ram speed, frame stiffness and controls, and only one of them may suit your job.
An H frame press earns its place where you need a stiff frame, generous working space and dependable force, such as straightening shafts, pressing bushes and bearings, bending and forming. This guide explains how it works, how to read the specification, and how to brief a manufacturer so the quotation you get is comparable and useful.
Why buyers in Pune choose Desire Hydraulics
- Built at MIDC Bhosari, Pune. Frame fabrication, machining, hydraulics and assembly are done in-house, so you deal with the team that builds the machine. Visit us and discuss your fixture in person.
- Tested before dispatch. Every press is pressure-tested at our works before it ships.
- Specified around your part. Tonnage, bed size, stroke and automation are matched to your component and cycle, not taken from a fixed catalogue.
- Own hydraulics. We also build power packs and cylinders, so the heart of your press is engineered by the same hands as the frame.
- Proven volume. 5,000+ orders delivered across our machine range, in India and the UAE.
Our wider hydraulic press range covers C-frame, four-column and deep drawing machines too, and our guide to hydraulic press manufacturers in India compares all the frame types.
What an H frame hydraulic press is
An H frame press has a welded steel frame shaped like the letter H, with the hydraulic cylinder mounted on the upper cross member and the working table between the uprights. The open sides mean long parts such as shafts, sections and welded structures can pass through the frame, which is why the design is popular for straightening.
Many H frame presses let you move the cylinder along the cross member and adjust the bed height, so you can position the load exactly under the ram. That is a practical advantage over fixed-position designs, but it also means two presses with the same tonnage can behave very differently. Look at:
- Frame plate thickness and how the joints are welded and stress-relieved
- Cylinder bore, rod diameter and stroke
- Whether the cylinder is fixed or movable, and how the bed height is adjusted
- Power pack sizing, valves and filtration
- Guiding, controls and safety arrangements
Applications of an H frame hydraulic press
Straightening
The most common H-frame job. The part rests on two support blocks and the ram pushes between them, bending it back past straight so it springs into line. Results depend on the supports, the pressing pad and how well the operator can measure the part, so the fixture matters as much as the press. Typical parts are shafts, machined components, fabricated sections and welded structures.
Pressing and assembly
Press-fitting bushes, bearings, pins and sleeves. Fit forces build gradually, and a hydraulic press gives you the control to seat parts without shock.
Bending and forming
Bending plate and sections, and forming with a die. Capacity depends on material, thickness, bend length and tooling.
Punching
Punching force is about the cut perimeter times thickness times the material's shear strength. A 50 mm round hole in 6 mm mild steel, at roughly 350 N/mm², needs about 330 kN, close to 34 tonnes, before you add any margin.
Deep drawing and moulding
Possible with the right stroke, die arrangement and speed control. If the work is die-based and repeated, ask whether a four-column press would suit better.
H frame hydraulic press specifications that matter
- Tonnage: the rated force. Do not pick the biggest number offered. Size it to the job with a margin.
- Stroke: the ram travel. A press with enough tonnage but too little stroke still cannot do the job.
- Daylight: the open height between ram and bed. It must clear the die, fixture and part with room to load.
- Table size: big enough for the fixture, but not so big that it adds cost and footprint for no reason.
- Hydraulic pressure and bore: together they set the force. At 160 bar, a 200 mm bore cylinder gives roughly 50 tonnes; at 250 bar, a 300 mm bore gives roughly 180 tonnes.
- Power pack: pump, motor, reservoir, valves and filters decide ram speed and oil life.
- Ram speeds: approach, pressing and return speeds affect cycle time, so ask for them separately.
- Controls: from manual valves to PLC and HMI with sensors, pressure holding and automatic return.
How to choose the right H frame press
Work from the job backwards.
- Name the operation and the material, including thickness and strength.
- Estimate the force for that operation, then add a working margin.
- Set stroke, daylight and table size from your tooling and part.
- Decide how often it runs. A press used ten times a day has different needs from one running multiple shifts.
- Choose the level of control: manual, semi-automatic or PLC-based.
- Tell the manufacturer about future jobs, so the press is not outgrown in a year.
H frame vs C frame vs four-column
| Frame | Strengths | Choose it when |
|---|---|---|
| H frame | Stiff frame, open sides for long parts, adjustable positioning on many designs | You do straightening, heavier pressing, forming and varied work on large parts. |
| C frame | Open front, quick loading, compact footprint | You do lighter pressing, punching, bending or assembly at a workstation. |
| Four-column | Even load over a large bed, guided moving platen | You run die-based work such as deep drawing, forming or compression moulding. |
No frame is best everywhere. The right choice comes from the application, force, tooling and working area. See our 4 column hydraulic press guide for die-based work.
H frame hydraulic press manufacturer in Pune and across India
Pune's industrial belt runs across Bhosari, Pimpri-Chinchwad, Chikhali, Chakan, Talegaon and Ranjangaon, with automotive, fabrication, machinery and sheet-metal users all needing presses. We are at MIDC Bhosari in the middle of it, which makes site visits, fixture trials and service straightforward for customers here.
Outside Pune the process is the same: drawings and a call, a written specification, manufacture and testing at our works, dispatch, then installation and commissioning at your site.
- Nashik: engineering and auto-component units needing pressing, straightening and forming.
- Chhatrapati Sambhajinagar (Aurangabad): component production, assembly and sheet-metal work.
- Ahmedabad and Gujarat: fabrication, metal forming and general engineering units.
- Coimbatore and Tamil Nadu: machinery, foundry and general engineering users.
- Kerala: fabrication, rubber and engineering units, where we confirm delivery and commissioning scope in the quotation.
- Mumbai, Nagpur, Kolhapur and other states: quoted the same way, and we also supply the UAE.
What decides H frame hydraulic press price
Tonnage, frame size and plate thickness, stroke, table size, daylight, cylinder, pump and motor, valves, controls and automation, safety systems, customisation, transport and installation all move the price. That is why the cheapest quotation is often the least comparable one. Compare capacity, construction, hydraulics, controls, application fit and support together.
What to send for a quotation
"Need 100 ton H frame press, price?" gives us very little to work with. Send what you know:
- The operation and the material with its thickness
- Component length, width, height and weight
- Required force, if known, and the stroke you expect
- Table size, daylight and tooling or fixture details
- Parts per shift and the level of automation
- Delivery location, so transport and commissioning can be planned
A drawing or clear photograph helps a lot. Use the enquiry form or call +91 75585 54709.
H frame hydraulic press: frequently asked questions
What is an H frame hydraulic press?
An H frame hydraulic press is an industrial press built on an H-shaped structural frame, with a hydraulic cylinder, working table, power pack and controls. It is used for pressing, straightening, bending, forming, punching and assembly, depending on its configuration and tooling.
What is an H type hydraulic press?
H type hydraulic press is another name for the H frame hydraulic press. Both terms describe the same general frame configuration.
Who is a leading H frame hydraulic press manufacturer in Pune?
Desire Hydraulics is an H frame hydraulic press manufacturer at MIDC Bhosari, Pune, Maharashtra. Its presses are designed, machined and pressure-tested in-house, and the company has delivered 5,000+ orders across its machine range in India and the UAE.
What is an H frame hydraulic press used for?
Common uses are straightening shafts and fabricated parts, press-fitting bushes and bearings, bending, punching, forming, assembly, and in suitable set-ups deep drawing and moulding.
Is an H frame hydraulic press suitable for heavy-duty work?
Yes, when the frame, cylinder, hydraulic circuit, table and controls are designed for the load and duty cycle. Heavy-duty capability comes from the whole machine, not from cylinder size alone.
What is the difference between an H frame and a C frame hydraulic press?
A C-frame press has an open front that makes loading easy and suits lighter pressing, punching and assembly. An H-frame press has a stiffer frame and is usually chosen for heavier and larger work such as straightening and forming.
What is the difference between an H frame and a four-column hydraulic press?
An H-frame uses an H-shaped welded frame with open sides, so long parts can pass through. A four-column press guides the moving platen on four columns and spreads load evenly across a large bed, which suits die-based work such as deep drawing and moulding.
Which tonnage of H frame hydraulic press should I buy?
Work out the force your process needs, then add a working margin. Material, thickness, component geometry and tooling all matter, and a manufacturer can calculate it from your drawing.
How do I calculate the force needed for punching?
Punching force is about the cut perimeter multiplied by material thickness and shear strength. For example, a 50 mm round hole in 6 mm mild steel at roughly 350 N/mm² needs about 330 kN, close to 34 tonnes, before any margin.
Can an H frame hydraulic press do straightening, punching, bending and deep drawing?
Yes, each is possible with the right tonnage, tooling and set-up. Straightening also needs proper supports, and deep drawing needs suitable stroke, die arrangement and speed control.
What are the important H frame hydraulic press specifications?
Tonnage, stroke, daylight, table size, working height, hydraulic pressure, pump capacity, motor power, ram speeds, control system, automation and safety features.
What hydraulic pressure does an H frame hydraulic press use?
It varies by design and is chosen together with the cylinder bore and the force required. Pressure alone tells you little, so read it alongside bore size and tonnage.
Does an H frame hydraulic press need PLC control?
Not always. Manual or push-button valve control is fine for occasional pressing and straightening. PLC and HMI control help when you need repeatable cycles, sensors, pressure holding or automatic return.
How much does an H frame hydraulic press cost in India?
There is no single price. Cost depends on tonnage, frame size, stroke, table size, daylight, cylinder, power pack, controls, automation, customisation, transport and installation. Compare written quotations against the same specification.
Can Desire Hydraulics build a customised H frame hydraulic press?
Yes. Tonnage, stroke, bed size, daylight, cylinder arrangement, ejectors, PLC or HMI control and safety features can be specified around your process. Send drawings or photographs to get started.
Does Desire Hydraulics supply to Nashik, Chhatrapati Sambhajinagar, Ahmedabad, Coimbatore and Kerala?
Yes. Desire Hydraulics quotes and supplies H-frame presses across Maharashtra and to other Indian states, and also supplies the UAE. Transport, installation and commissioning are confirmed in the quotation.
How do I choose an H frame hydraulic press manufacturer in Pune?
Ask each one how they would specify the press for your component, whether the frame and hydraulics are built in-house, how the machine is tested before dispatch, and what installation and after-sales support is included.
How long does it take to manufacture an H frame hydraulic press?
It depends on capacity, customisation and automation. The delivery schedule is stated in the quotation, so confirm it before ordering.
What maintenance does an H frame hydraulic press need?
Check oil level and temperature, change filters on schedule, inspect hoses, fittings and cylinder seals for leaks, and confirm pressure settings, electrical connections and guarding. Follow the schedule supplied with the machine.